PLANET WGSD-1022 - Manual (Page 165)

management sessions will result in a delay, but will not be ignored.
Understanding Invalid Combinations of Source and Destination
Some invalid combinations of source and destination exist. Specifically, the following cannot be copied:
If the source file and destination file are the same file.
xmodem cannot be a destination. Can only be copied to image, boot and null.
tftp cannot be the source and destination on the same copy.
Copy Character Descriptions:
Character Description
! For network transfers, an exclamation point indicates that the copy process is taking
place.
Each exclamation point indicates the successful transfer of ten packets (512 bytes each).
. For network transfers, a period indicates that the copy process timed out. Many periods in
a
row typically mean that the copy process may fail.
Copying image file from a Server to Flash Memory
Use the copy source-url image command to copy an image file from a server to Flash memory.
Copying boot file from a Server to Flash Memory
Use the copy source-url boot command to copy a boot file from a server to Flash memory.
Copying a Configuration File from a Server to the Running Configuration
Use the copy source-url running-config command to load a "configuration file" from a network server
to the device "running configuration". The configuration is added to the "running configuration" as if the
commands were typed in the command-line interface (CLI). The resulting configuration file is a
combination of the previous "running configuration" and the loaded "configuration file", with the loaded
"configuration file" having precedence.
Copying a Configuration File from a Server to the Startup Configuration
Use the copy source-url startup-config command to copy a "configuration file" from a network server to
the device "startup configuration". These commands replace the startup configuration file with the copied
configuration file.
Storing the Running or Startup Configuration on a Server
Use the copy running-config destination-url command to copy the current configuration file to a