26 user interface commands, 1 enable, Syntax – PLANET WGSD-1022 User Manual
Page 309: Default configuration, Command mode, User guidelines
Global values
--------------------
TimeOut: 3
Source IP: 172.16.8.1
OOB Source IP: 176.16.8.1
OOB TACACS servers
IP address Status Port Single TimeOut
Source IP Priority
Connection
--------------- --------- ------- ---------------- --------------
--------------- ------------
172.16.1.1 Connected 49 No Global
Global 1
Global values
--------------
TimeOut: 3
Source IP: 172.16.8.1
OOB Source IP: 176.16.8.1
5.26 User Interface Commands
5.26.1 enable
The enable user EXEC command enters the privileged EXEC mode.
Syntax
enable [privilege-level]
privilege-level — Privilege level to enter the system. (Range: 1 - 15)
Default Configuration
The default privilege level is 15.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.