2 layer2 based acl – PLANET WGSD-1022 User Manual
Page 81
4.8.2 Layer2 Based ACL
The Layer2 Based ACL screen (see figure 4-38) allows a MAC based ACL to be defined. ACEs can be
added only if the ACL is not bound to an interface.
Figure 4-38 Layer2-Base ACL screen
The Page contains the following fields:
• ACL Name
Displays the user-defined MAC based ACLs
• New ACL Name
Specifies a new user-defined MAC based ACL name.
• Delete ACL
By which deletes the selected ACL
• Action
Indicates the ACL forwarding action. Possible field values are:
• Permit, by which forwards packets which meet the ACL criteria.
• Deny, drops packets which meet the ACL criteria.
• Shutdown, where drops packet that meet the ACL criteria, and
disables the port to which the packet was addressed.
• Source MAC
Address
Matches the source MAC address to which packets are addressed to
the ACE.
• Wildcard Mask
Defines the source IP address wildcard mask. Wildcard masks
specify which bits are used and ignored.
A wild card mask of 255.255.255.255 indicates that no bit is