PLANET WGSD-1022 - Manual (Page 336)

Keyword Description
Radius Uses the list of all RADIUS servers for authentication
None Uses no authentication
Default Configuration
The default behavior of the "aaa authenctication" for dot1.x is "failed to authenticate". If the 8021.x calls
the AAA for authentication services it will receive a fail status.
Command Mode
Global configuration mode
User Guidelines
The additional methods of authentication are used only if the previous method returns an error, not if it
fails. To ensure that the authentication succeeds even if all methods return an error, specify none as the
final method in the command line.
Examples
The following example uses the aaa authentication dot1x default command with no authentication.
Console (config)# aaa authentication dot1x default none
5.29.2 dot1x system-auth-control
The dot1x system-auto-control command enables 802.1x globally. Use the no form of this command to
disable 802.1x globally.
dot1x system-auto-control
no dot1x system-auto-control
Syntax
This command has no arguments or keywords.
Default Configuration
Disabled
Command Modes
Global configuration mode
User Guidelines
There are no user guidelines for this command.