PLANET WGSD-1022 - Manual (Page 338)

5.29.4 dot1x re-authentication
The dot1x re-authentication interface configuration command enables periodic re-authentication of the
client. Use the no form of this command to return to the default setting.
Syntax
dot1x re-authentication
no dot1x re-authentication
This command has no arguments or keywords.
Default Configuration
Periodic re-authentication is disabled.
Command Mode
Interface configuration (Ethernet)
User Guidelines
There are no user guidelines for this command.
Examples
The following example enables periodic re-authentication of the client.
Console (config)# interface ethernet e8
Console (config-if)# dot1x re-authentication
5.29.5 dot1x timeout re-authperiod
The dot1x timeout re-authperiod interface configuration command sets the number of seconds
between reauthentication attempts. Use the no form of this command to return to the default setting.
Syntax
dot1x timeout re-authperiod seconds
no dot1x timeout re-authperiod
ƒ seconds — Number of seconds between re-authentication attempts. (Range: 300 - 4294967295)
Default Configuration
3600