PLANET WGSD-1022 - Manual (Page 297)

Command Mode
Global Configuration mode
User Guidelines
The logging process controls the distribution of logging messages to the various destinations, such as
the logging buffer, logging file, or syslog server. Logging on and off for these destinations can be
individually configured using the logging buffered, logging file, and logging global configuration
commands. However, if the logging on command is disabled, no messages are sent to these
destinations. Only the console receives messages.
Example
The following example shows how logging is enabled.
Console (config)# logging on
5.24.2 logging
The logging global configuration command logs messages to a syslog server. To delete the syslog
server with the specified address from the list of syslogs, use the no form of this command.
Syntax
logging {ip-address} [port port] [severity level] [facility facility] [description text]
no logging {ip-address}
ƒ ip-address — IP address of the host to be used as a syslog server. An out-of-band IP address can
be specified as described in the usage guidelines.
ƒ port — Port number for syslog messages. If unspecified, the port number defaults to 514.
(Range: 1 - 65535)
ƒ severity level — Limits the logging of messages to the syslog servers to a specified level:
emergencies, alerts, critical, errors, warnings, notifications, informational and debugging.
If unspecified, the default level is informational.
ƒ facility — The facility that is indicated in the message. Can be one of the following values: local0,
local1, local2, local3, local4, local5, local 6, local7. If unspecified, the port number defaults to
local7.
ƒ text — Syslog server description, which can be up to 64 characters.
Default Configuration
As described in the field descriptions.
Command Mode
Global Configuration mode