PLANET WGSD-1022 User Manual
Page 64
Figure 4-25 Bridge Multicast screen
The Page contains the following fields:
• Set Bridge Multicast
Filtering
The check box allows enable Bridge Multicast Filtering function.
• VLAN ID
This identifies a VLAN to be configured to a Multicast service.
• Multicast Address
Identifies the Multicast group MAC address/IP address.
• Interface
Displays Interface that can be added to a Multicast service.
The configuration options are as follows:
• Static, indicates the port is user-defined.
• Dynamic, indicates the port is configured dynamically.
• Forbidden, forbidden ports are not included the Multicast group,
even if IGMP snooping designated the port to join a Multicast
group.
• None, displays the port is not configured for Multicast service.
• LAG
Displays LAG that can be added to a Multicast service.
The fields are the same for both areas.
Use the Add to Table button when you want to assigns ports to a specific Multicast service address
group.