PLANET WGSD-1022 - Manual (Page 215)

5.13.4 management access-class
The management access-class global configuration command defines which management access-list
is used. To disable restriction, use the no form of this command.
Syntax
management access-class {console-only | name}
no management access-class
ƒ name — Name of the access list. If unspecified, defaults to an empty access-list.(Range: Valid
name)
ƒ console-only — The device can be managed only from the console.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures an access-list called "mlist" as the management access-list.
Console (config)# management access-class mlist
5.13.5 show management access-list
The show management access-list privileged EXEC command displays management access-lists.
Syntax
show management access-list [name]
ƒ name — Name of the access list. If unspecified, defaults to an empty access-list.(Range: Valid
name)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode