3 sntp – PLANET WGSD-1022 User Manual
Page 34

• Gateway
Enter the default gateway for the IP interface.
The factory default value is 0.0.0.0
• DNS Server
Enter the IP Address of the DNS Server. The Domain Name System
(DNS) converts user-defined domain names into IP addresses
4.2.3 SNTP
In the Basic Setup Table, you can see the SNTP (see figure 4-5), by which you can configure the time
settings for the Switch. You can select SNTP Server Time or System Time.
Figure
4-5 SNTP screen
The Time page includes the following fields:
• Use System Time
Specifies that the system time is not set by an external source but the
Local time settings
• Use SNTP Time
Specifies that the system time is set via an SNTP server
• Hours / Minuntes /
Seconds
Defines the system time. The field format is HH:MM:SS, for example,
21:15:03.
• Month / Day / Year
Defines the system date. The field format is Day:Month:Year, for
example, 04 May 2050