PLANET WGSD-1022 - Manual (Page 257)

5.19.10 show rmon log
The show rmon log user EXEC command displays the RMON logging table.
Syntax
show rmon log [event]
ƒ event — Event index. (Range: 0 - 65535)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the RMON logging table.
Console# show rmon log
Maximum table size: 500
Event Description Time
--------- ----------------- ---------
1 Errors Jan 18 2002 23:48:19
1 Errors Jan 18 2002 23:58:17
2 High Broadcast Jan 18 2002 23:59:48
Console# show rmon log
Maximum table size: 500 (800 after reset)
Event Description Time
--------- ---------------- ---------
1 Errors Jan 18 2002 23:48:19
1 Errors Jan 18 2002 23:58:17
2 High Broadcast Jan 18 2002 23:59:48
The following table describes the significant fields shown in the display:
Field Description
Event An index that uniquely identifies the event.
Description A comment describing this event.
Time The time this entry created.