PLANET WGSD-1022 - Manual (Page 330)

User Guidelines
There are no user guidelines for this command.
Example
The following example displays all VLAN information.
Console# show vlan internal usage
VLAN Usage IP Address Reserved
-------- --------- ----------------- -----------------
1007 g1 Active No
1008 g2 Inactive Yes
1009 e3 Active Yes
5.27.21 show interfaces switchport
The show interfaces switchport privileged EXEC command displays switchport configuration.
Syntax
show interfaces switchport {ethernet interface | port-channel port-channel-number}
ƒ interface — Specific interface, such as ethernet e8.
ƒ port-channel-number — Valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays switchport configuration individually for e1.
Console> show interface switchport ethernet e1
Port e1:
Port mode: General
GVRP Status: disabled
Ingress Filtering: true
Acceptable Frame Type: admitAll