PLANET WGSD-1022 User Manual

Page 38

Advertising
background image

configured only when auto-negotiation is disabled on that port

• Duplex Mode

The port duplex mode, Full (transmission occurs in both directions

simultaneously) or Half (transmission occurs in only one direction at a

time). This mode can be configured only when auto-negotiation is

disabled and port speed is set to 10Mbps or 100Mbps.

It cannot be configured on Link Aggregation Groups (LAGs)

• MDI/ MDIX

Shows the MDI/MDIX status of the port. To use the MDI setting if the

port is connected to an end station. To use the MDIX setting if the port

is connected to a hub or another switch

• Flow control

Shows the flow control status of the port. It is active when the port

uses Full Duplex Mode

• Phy Type

Shows the port type

• LAG

Shows whether the port is part of a LAG

• PVE

It bypasses the Forwarding Database and forwards all unicast,

multicast, and broadcast traffic to an uplink when a port is a Private

VLAN Edge (PVE) port, Uplinks can be ports or LAGs

• Edit

It will open the port configuration detail screen

Advertising