17 show interfaces counters, Syntax, Default configuration – PLANET WGSD-1022 User Manual
Page 180: Command modes, User guidelines, Examples
----- ------------------
1 Output
5.7.17 show interfaces counters
The show interfaces counters user EXEC command displays traffic seen by the physical interface.
Syntax
show interfaces counters [ethernet interface | port-channel port-channel-number]
interface — A valid Ethernet port.
port-channel-number — A valid port-channel index.
Default Configuration
This command has no default configuration.
Command Modes
Privilege EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays traffic seen by the physical interface:
Console# show interfaces counters
Port InOctets InUcastPkts InMcastPkts InBcastPkts
------- ------------- --------------- ---------------- -----------------
e1 183892 1289 987 8
e2 0 0 0 0
e3 123899 1788 373 19
Port OutOctets OutUcastPkts OutMcastPkts OutBcastPkts
------- ------------- ------------------- ------------------- ------------------
e4 9188 9 8 0
e5 0 0 0 0
e6 8789 27 8 0