Cleaning the color density sensors – Xerox WorkCentre 6515DNI User Manual
Page 175
Advertising
Maintenance
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer 175
User Guide
Cleaning the Color Density Sensors
If the print or color density is too light, missing, or the background is foggy, clean the color density
sensors.
1.
Power off the printer. For details, refer to
Turning the Printer On and Off
on page 52.
2.
Lift the rear door release and pull open the door.
3.
Use a dry cotton swab to clean the color density sensors.
4.
Close the rear door.
Advertising