Copy and scan problems – Xerox WorkCentre 6515DNI User Manual
Page 218
Troubleshooting
218
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer
User Guide
Copy and Scan Problems
If the copy or scan quality is poor, refer to the following table.
Symptoms
Solutions
Lines or streaks only present in copies made
from the document feeder.
There is debris on the CVT glass or the second-side scanning lens
assembly. When scanning, the paper from the document feeder
passes over the debris on the glass surfaces, resulting in lines and
streaks. Clean all glass surfaces with a lint-free cloth. For details,
refer to
Cleaning the Scanner
on page 166.
Spots present in copies taken from the
document glass.
There is debris on the document glass. When scanning, the debris
creates a spot on the image. Clean all glass surfaces with a lint-free
cloth.
Image is too light or too dark.
Adjust the lighten/darken setting.
Colors are inaccurate.
•
Adjust color settings and confirm that the correct Original Type
is set.
•
Perform the Scan Color Consistency procedure. For details, refer
to
Color Registration
on page 176.
If the problem persists, for online support information, g