Xerox WorkCentre 6515DNI User Manual
Page 62
Installation and Setup
62
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer
User Guide
Installing the Drivers and Utilities for Macintosh OS X
1.
Insert the Software and Documentation disc into the appropriate drive on your computer.
2.
Open Xerox
®
Print Drivers 3.xx.x.dmg/.pkg as needed for your printer.
3.
To run Xerox
®
Print Drivers 3.xx.x.dmg/.pkg, double-click the appropriate file name.
4.
When prompted, click Continue.
5.
To accept the license agreement, click I Agree.
6.
To accept the current installation location, click Install, or select another location for the installation
files, then click
Install.
7.
If prompted, enter your password, then click OK.
8.
From the list of discovered printers, select your printer, then click Next.
9.
If your printer does not appear in the list of discovered printers:
a.
Click the Network Printer Icon.
b.
Type the IP address of your printer, then click Continue.
c.
Select your printer in the list of discovered printers, then click Continue.
10.
If your printer was not detected, verify that the printer is on and that the Ethernet or USB cable is
connected properly.
11.
To accept the print queue message, click OK.
12.
Select or clear the Set Printer as Default and Print a Test Page check boxes.
13.
Click Continue, then click Close.