Moving the printer – Xerox WorkCentre 6515DNI User Manual
Page 186
Maintenance
186
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer
User Guide
Moving the Printer
WARNINGS:
•
To lift the printer, always use at least two people to grasp the hand holds on each side of
the printer.
•
To prevent you from dropping the printer or injury, lift the printer firmly by gripping the
recessed areas on both sides of the printer. Never lift the printer by gripping any other
areas.
•
If the optional 550-Sheet Feeder is installed, uninstall it before you move the printer.
If the optional 550-Sheet Feeder is not fixed to the printer securely, it could fall to the
ground and cause injury.
Follow these instructions when moving the printer:
1.
Power off the printer, then disconnect the power cord and other cables from the back of the printer.
WARNING:
To prevent electric shock, never touch the power plug with wet hands. When
removing the power cord, ensure that you pull the plug and not the cord. Pulling the cord can
damage it, which can lead to fire or electric shock.
2.
Remove any paper from the Bypass Tray.