Xerox WorkCentre 6515DNI - Manual (Page 251)

System Administrator Functions
Xerox ® WorkCentre ® 6515 Color Multifunction Printer 251
User Guide
Reset 802.1X and IPsec
The non-volatile memory (NVRAM) stores printer settings, even after the power is turned off. The Reset
802.1X and IPsec feature resets specific settings stored in the printer for Ethernet connectivity settings.
After executing this function and restarting the printer, Ethernet 802.1X and IPsec settings are reset to
their default values.
To reset the non-volatile memory 802.1X and IPsec settings:
1.
At the printer control panel, press the Home button.
2. Touch Device > Resets > Reset 802.1X and IPsec.
3. At the prompt, touch Reset.
4. When the process is complete, the printer restarts automatically.
Reset to Factory Defaults
The non-volatile memory (NVRAM) stores printer settings, even after the power is turned off. The Reset
to Factory Defaults feature erases all settings and returns the printer to original factory state. All jobs,
presets, Apps, and device settings are reset. When complete, the printer restarts, then displays the Install
Wizard.
To reset the printer to factory defaults:
1.
At the printer control panel, press the Home button.
2. Touch Device > Resets > Reset to Factory Defaults.
3. At the prompt, touch Reset.
4. When the process is complete, the printer restarts automatically.
Reset Fonts, Forms, and Macros
This feature deletes the fonts, forms, and macros downloaded into the non-volatile memory of the
printer.
To reset downloaded fonts, forms and macros:
1.
At the printer control panel, press the Home button.
2. Touch Device > Resets > Reset Fonts, Forms, and Macros.
3. At the prompt, touch Clear.
4. When the process completes, the printer restarts automatically.