Installation and setup overview – Xerox WorkCentre 6515DNI User Manual
Page 38
Installation and Setup
38
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer
User Guide
Installation and Setup Overview
Before you print, ensure that your computer and the printer are plugged in, turned on, and connected.
Configure the initial settings of the printer, then install the print driver software and utilities on your
computer.
You can connect to your printer directly from your computer using USB, or connect over a network using
an Ethernet cable or wireless connection. Hardware and cabling requirements vary for the different
connection methods. Routers, network switches, modems, Ethernet cables, and USB cables are not
included with your printer and must be purchased separately. Xerox recommends an Ethernet connection
because it is typically faster than a USB connection, and it provides access to the Embedded Web Server.
Note:
If the
Software and Documentation disc is not available, you can download the latest print
drivers from
For reference:
Selecting a Location for the Printer
on page 39
Selecting a Connection Method
on page 40
Connecting the Printer
on page 40
Configuring Network Settings
on page 54
Installing the Software
on page 60