Xerox WorkCentre 6515DNI - Manual (Page 192)

Troubleshooting
192 Xerox ® WorkCentre ® 6515 Color Multifunction Printer
User Guide
General Troubleshooting
This section includes:
•
Printer Does Not Power On ......................................................................................................................................... 192
• Printer Resets or Powers Off Frequently ................................................................................................................ 193
• Printer Does Not Print ................................................................................................................................................... 193
• Printing Takes Too Long .............................................................................................................................................. 194
• Document Prints From Wrong Tray ........................................................................................................................ 195
• Automatic 2-Sided Printing Problems .................................................................................................................... 195
• Printer is Making Unusual Noises ............................................................................................................................. 195
• Paper Tray Will Not Close ........................................................................................................................................... 195
• Condensation has Formed Inside the Printer ...................................................................................................... 196
This section contains procedures to help you locate and resolve problems. Resolve some problems by
simply restarting the printer.
Printer Does Not Power On
Probable Causes Solutions
The power switch is not turned on. At the printer control panel, press the Power/Wake button.
For details, refer to Turning the Printer On and Off on page 52.
The power cord is not plugged into the outlet
correctly.
Power off the printer, and plug the power cord securely into the
outlet.
Something is wrong with the outlet
connected to the printer.
• Plug another electrical appliance into the outlet and check if it
operates properly.
• Try a different outlet.
The printer is connected to an outlet with a
voltage or frequency that does not match the
printer specifications.
Use a power source with the specifications listed in the Electrical
Specifications on page 304.
CAUTION: Plug the three-wire cord with grounding prong directly into a grounded AC outlet.