Parker Products COMPAX-M /-S (L) - Manual (Page 176)

Accessories and options COMPAX-M / -S
176
9.3 Motors
Suitable motors are described in the motor catalogue (Article No.: 192-
060011)!
COMPAX also supports the operation of linear motors. For this, COMPAX requires
option S3 (interface to linear encoder and Hall sensor; assignment X12 see Page
46).
Conditions regarding the linear motor:
♦ 3 phase synchronous linear motors with:
• sine-cosine linear encoder (1V
ss
).or TTL (RS422)
• digital Hall sensor commutation (5V) with following signal sequence:
Hall 2
Hall 3
Hall 1
Phase
V-U
Phase
U-W
Phase
W-V
The depicted signal sequence applies for positive direction.
Only the modes P212=7 and P212=11 are presently available as reference modes
for linear motors!
For highly dynamic and precise applications, we provide the linear motor LXR,
which can be operated with COMPAX 25XXS or COMPAX 10XXSL (with the S3
option and GBK18 and GBK20 cable). Ask for our leaflet.
When operating the linear motor LXR, reduced norminal and peak currents apply to
COMPAX:
Unit
COMPAX ..
Nominal
current [Aeff] Peak current
[Aeff] <5s Power [kVA]
with mains supply: 230V AC
10XXSL 2.1 4.2 0.8
25XXS 4.1 8.2 1.4
EMD motors
Linear motor:
Note concerning
the reference mode:
Linear motor LXR
Note: