Agilent Technologies Quaternary Pump 1100 Series - Manual (Page 122)

122
Repairing the Pump
Reassembling the Pump Head Assembly
4 Slide the pump head assembly onto the
metering drive. Apply a small amount of
pump head grease to the pumphead screws
and the balls of the spindle drive. Tighten the
pumphead screws stepwise with increasing
torque. 5 Reconnect all capillaries, tubes and the active
inlet valve cable to its connector.
Pump head
Balls of spindle drive
Metering drive
Pumphead screws