Agilent Technologies Quaternary Pump 1100 Series - Manual (Page 150)

150
Repairing the Pump
Exchanging the Power Supply
12 Slide the leak sensor cable through the foam
and replace the bottom foam. 13 Reinstall the main board, see “Exchanging
the Low Pressure Pump Main Board (LPM
Board)” on page 131.
14 Re-install pump assembly, fan and damper
into the bottom foam and re-connect to the
main board. 15 Place the Z-panel into its position and tighten
the two screws.
Screws
Z-panel