Agilent Technologies Quaternary Pump 1100 Series - Manual (Page 216)

216
Introduction to the Quaternary Pump
Optional Interface Boards
Optional Interface Boards
The Agilent 1100 Series modules have one optional board slot that allows to
add an interface board to the modules.
BCD Board
The BCD board provides a BCD output for the bottle number of the
Agilent 1100 Series autosampler and four external contacts. The external
contact closure contacts are relay contacts. The maximum settings are: 30 V
(AC/DC); 250 mA (fused). There are general purpose cables available to
connect the BCD output, see “BCD Cables” on page 190 and the external
outputs, see “External Contact Cable” on page 193 to external devices.
Figure 48 Block Diagram BCD Board
Table 29 Optional Interface Boards
Description Part Number
BCD Board G1351-68701
Fuse 250 mA (four are on the board) 2110-0004
LAN Board (see next page for details)
Processor
interface
Board
identification
BCD register
External
contacts
Line driver
12
4 ×
250 mA
BCD
connector
External
contact
connector
R
FI f
ilt
er
RF
I fi
lte
r
+