Agilent Technologies Quaternary Pump 1100 Series - Manual (Page 233)

233
Control Module Screens for the Quaternary Pump
Screens available from the Analysis screen
Screens available from the Analysis screen
The Analysis screen This is the wake-up screen, if the Agilent 1100 quaternary pump is the only
configured Agilent 1100 module. It is used to enter the most common pump
method parameters.
The m-key allows access to the context sensitive menu. Date&Time allows
you to change time settings. Print Screen gives acces to the print
configuration screen. About tells you the current firmware revision and the
serial# of your control module. Setup view leads you to add sections for
additional Agilent 1100 modules. Restart re-boots the control module.