Agilent Technologies Quaternary Pump 1100 Series - Manual (Page 158)

158
Repairing the Pump
Replacing the Top Cover and Foam
7 Ensure clips are seated correctly and, move
the lever back. 8 Place the quaternary pump back to its
position in the stack, place vacuum degasser
and solvent cabinet back in place and
re-connect all tubes and capillaries.
9 Replace the leak funnel with the waste tube.
Locate the lower end of the waste tube in the
holder of the leak pan and clip tube to the
holder at the gradient valve cover. 10 Replace the front covers and reconnect the
power cable to pump and on-line degasser
and switch the modules on.
Lever
Leak funnel
Waste tube holder