Agilent Technologies Quaternary Pump 1100 Series - Manual (Page 154)

154
Repairing the Pump
Exchanging the Status Light Pipe
Exchanging the Status Light Pipe
When required If part is broken
Tools required Screwdriver Pozidriv #1
Part required Status light pipe 5041-8384
Preparation for this procedure:
❏Remove the front cover and top cover, see “Removing the Top Cover and Foam” on page 128.
1 The status light pipe is clipped into the top
cover. 2 Replace the top cover, see “Replacing the Top
Cover and Foam” on page 156.