Agilent Technologies Quaternary Pump 1100 Series - Manual (Page 240)

240
Control Module Screens for the Quaternary Pump
Screens available from the Analysis screen
Press F6 key (Select). Here you can add additional online signals (maximum
are 3). Additional signals could also be chromatograms or temperature
signals from other modules. Use the Right/Left arrows to switch between
Available and Selected Signals. Use the F8 key (Move) to enter available
signals into the box for selected signals or vice versa. Press Done to activate
the changed settings and to return to the Plot screen.
Method screens On the Analysis screen use the F3 key (Method) to view the parameters in a
method and F8 key (Save As) to save the method in the module(s). The
PC-Card key is only active when a PCMCIA card is inserted in the control
module (has to be inserted even before powercycling).