Agilent Technologies Quaternary Pump 1100 Series User Manual
Page 129
Advertising
129
Repairing the Pump
Removing the Top Cover and Foam
3
Lift the clips on both sides of the top cover
(1). Remove the top cover (2).
4
Unscrew the screws on the top plate and
remove the plate by lifting its back first and
then sliding to the front.
5
If an optional interface board is installed,
remove it from the pump slot.
6
Remove the top foam.
Cover
clip
Cover
clip
(1)
(1)
(2)
Screws
Safety
light
switch
Advertising