Refer to table 5.3 for a lis – Fire-Lite MS-9050UDC Addressable Fire Alarm Control Panel User Manual
Page 149
MS-9050 Series Manual — P/N 52413:G 4/14/2014
149
Transmittal Priorities
Central Station Communications
The table below shows UL listed receivers which are compatible with the MS-9050UD.
1.
With version 3.9 software
2.
With 685-8 Line Card with Rev. 4.4d software
3.
With 9002 Line Card Rev. 9035 software or 9032 Line Card with 9326A software
4.
With 124077V2.00 Receiver and 126047 Line Card Rev. M
5.
With V.7301 Receiver S/W
6.
With 01.01.03 Receiver S/W and Line Card 01.01.03
7.
Surgard System III software version 1.6
8.
Surgard MLR-2 software version 1.86
9.
With DSP4016 and V1.6 Line Card
10. With 124060V206B and 124063 Line Card Rev. B
IMPORTANT! It is the installer’s responsibility to ensure that the Digital Alarm Communica-
tor/Transmitter is compatible with the Central Station Receiver, utilized by the monitoring service,
prior to installation. The Compatibility Table provides a list of compatible receivers and associated
software versions for the receivers. Changes in the hardware and/or software by the receiver man-
ufacturers may affect the receiver compatibility with the FACP DACT. After completing the instal-
lation, communication between the DACT and Central Station Receiver must be tested and
verified.
Format
FBI
CP
22
0
F
B
(1
)
Ad
emco
685 (2
)
Silent Kn
ight
9000 (
3)
Silent Kn
ight
9800 (
4)
Osb
o
rn
e Hof
fm
a
n
200
0E (5)
Ra
d
ion
ic
s
6600 (
6)
Surgard
Syst
em III
(7)
Surgard
MLR
-2(8)
Surgard
MR
-2000(
9)
Ad
emco
MX8000
(10)
4+1 Ademco Express
4+2 Ademco Express
3+1/Standard/1800/2300
3+1/Expanded/1800/2300
3+1/Standard/1900/1400
3+1/Expanded/1900/1400
4+1/Standard/1800/2300
4+1/Expanded/1800/2300
4+1/Standard/1900/1400
4+1/Expanded/1900/1400
4+2/Standard/1800/2300
4+2/Expanded/1800/2300
4+2/Standard/1900/1400
4+2/Expanded/1900/1400
Ademco Contact ID
Not Used
Table 5.3 Compatible UL Listed Receivers