Fire-Lite MS-9050UDC Addressable Fire Alarm Control Panel - Manual (Page 65)

MS-9050 Series Manual — P/N 52413:G 4/14/2014 65
Master Programming Level Programming
Pressing 2 while viewing the Adjective/Noun Screen will cause the following screen(s) to be dis-
played. Note that the keyboard down arrow key must be pressed to see all the Noun screens. Press
the number corresponding to the noun that is to be used as a descriptor for the location of the detec-
tor currently being programmed. When a noun has been selected, it will appear at the top of the
display as indicated by the asterisks.
Pressing 3 or 4 while viewing the Adjective/Noun Screen will display screens similar to the previ-
ous Adjective and Noun Screens. The new screens will list custom Adjectives and Nouns which
have been programmed into the control panel by the user utilizing the PK-CD programming kit.
These descriptors are selected as described in the previous sections.
Description
The Description selection allows the programmer to enter additional information about the detector
currently being programmed. This information will be displayed as part of the device label on the
display. Pressing 2 while viewing Edit Detector Screen #5 will cause the following screen to be
displayed:
A flashing cursor will appear at the first asterisk to the left. The programmer can enter additional
descriptive information about the device being programmed. This information will appear on the
display along with the standard device label information.
A maximum of 20 characters (including spaces) can be entered. To enter alphanumeric characters
from the keypad, repeatedly press the appropriate key until the desired character is displayed in the
first position. For example, to enter the letter B, press the 2 (ABC) key three times to toggle
through the characters 1, A, and B. Press the right arrow key to move the cursor one position to the
right and repeat the process to enter the next character. To enter a space, press the * (QZ) key four
times until a blank appears in the desired position. When all characters have been entered, press the
Enter key to store the information. The display will return to the Edit Detector Screen #5, display-
ing the new information at the bottom of the screen.
1=STANDARD ADJECTIVE
2=STANDARD NOUN
3=CUSTOM ADJECTIVE
4=CUSTOM NOUN
Adjective/Noun Screen
QQQQQQQQQQQQQQQQQQQQ
1=BASEMENT
2=BOILER RM
3=CLASSROOM
Noun Screen #1
QQQQQQQQQQQQQQQQQQQQ
1=CLOSET
2=CORRIDOR
3=ELECTRIC RM
Noun Screen #3
QQQQQQQQQQQQQQQQQQQQ
1=ELEVATOR
2=ENTRANCE
3=FLOOR
Noun Screen #5
QQQQQQQQQQQQQQQQQQQQ
1=GARAGE
2=HALLWAY
3=HVAC RM
Noun Screen #7
QQQQQQQQQQQQQQQQQQQQ
1=KITCHEN
2=LOBBY
3=OFFICE
Noun Screen #2
QQQQQQQQQQQQQQQQQQQQ
1=STAIRWAY
2=STOREROOM
3=WING
Noun Screen #6
QQQQQQQQQQQQQQQQQQQQ
1=PATIENT
2=RESTROOM
3=ROOM
Noun Screen #4
QQQQQQQQQQQQQQQQQQQQ
1=ZONE
Noun Screen #8
1=STANDARD ADJECTIVE
2=STANDARD NOUN
3=CUSTOM ADJECTIVE
4=CUSTOM NOUN
Adjective/Noun Screen
EDIT DETECTOR
1=ADJECTIVE/NOUN
2=DESCRIPTION
Edit Detector Screen #5 DESCRIPTION 1D002
QQQQQQQQQQQQQQQQQQQQ
Adjective/Noun Screen