8 optional modules/accessories installation, 1 4xtmf transmitter module installation, Optional modules/accessories installation – Fire-Lite MS-9050UDC Addressable Fire Alarm Control Panel User Manual

Page 33: 4xtmf transmitter module installation, Figure 2.9 wiring phone jacks

Advertising
background image

MS-9050 Series Manual — P/N 52413:G 4/14/2014

33

Optional Modules/Accessories Installation

Installation

The control panel's digital communicator is built into the main circuit board. Connection and wir-
ing of two phone lines is required as shown below.

2.8 Optional Modules/Accessories Installation

2.8.1 4XTMF Transmitter Module Installation

The 4XTMF provides a supervised output for a local energy municipal box transmitter in addition
to alarm and trouble reverse polarity. A jumper option allows the reverse polarity circuit to open
with a system trouble condition if no alarm condition exists. A disable switch allows disabling of
the transmitter output during testing to prevent accidental calling of the monitoring service.

Local Energy Municipal Box Service (NFPA 72 Auxiliary Fire Alarm Systems):
Supervisory Current: 5.0 mA
Trip Current: 350 mA (subtracted from notification appliance power)
Coil Voltage: 3.65 VDC
Maximum Coil Resistance: 14.6 ohms
Maximum allowable wire resistance between panel and trip coil: 3 ohms
Municipal Box wiring can leave the building

Remote Station Service (NFPA 72 Remote Station Fire Alarm Systems) - Intended for connec-
tion to a polarity reversal circuit or a Remote Station receiving unit having compatible rat-
ings:

!

WARNING: RISK OF ELECTRIC SHOCK
DISCONNECT ALL SOURCES OF POWER (AC AND DC) BEFORE INSTALLING OR REMOVING
ANY MODULES OR WIRING.

Figure 2.9 Wiring Phone Jacks

9

0

50

ud

ja

c

k

2

.w

mf

KISSOFF

PRIMARY

ACTIVE

SECONDARY

ACTIVE

PHONE LINE

PHONE LINE

P

R

IM

A

R

Y

S

E

C

ONDA

RY

Modular Female
Connectors

Male Plug

Connectors

Secondary
Phone Line
PH-2

Primary

Phone Line

PH-1

7 foot cable

MCBL-7

(ordered

separately)

Note: Shorting bars

inside RJ31X Jack

removed during male

plug insertion.

RJ31X Jack

RJ31X Jack

Ring

Ring

Tip

Tip

Tip

Ring

Tip

Ring

Green Wire

Red Wire

To premise phones

Green Wire

Red Wire

To premise phones

(Primary Lines)
Incoming Telco
Phone Lines

(Secondary Lines)
Incoming Telco
Phone Lines

Advertising
This manual is related to the following products: