Allied Telesis AT-S63 - Manual (Page 101)

Section I: Basic Features 101
Chapter 6
SNMPv2 and SNMPv2c Commands
This chapter contains the following commands:
ˆ “ADD SNMP COMMUNITY” on page 102
ˆ “CREATE SNMP COMMUNITY” on page 104
ˆ “DELETE SNMP COMMUNITY” on page 107
ˆ “DESTROY SNMP COMMUNITY” on page 109
ˆ “DISABLE SNMP” on page 110
ˆ “DISABLE SNMP AUTHENTICATETRAP” on page 111
ˆ “DISABLE SNMP COMMUNITY” on page 112
ˆ “ENABLE SNMP” on page 113
ˆ “ENABLE SNMP AUTHENTICATETRAP” on page 114
ˆ “ENABLE SNMP COMMUNITY” on page 115
ˆ “SET SNMP COMMUNITY” on page 116
ˆ “SHOW SNMP” on page 118
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information on this feature, refer to Chapter 5,
“SNMPv1 and SNMPv2c” in the AT-S63 Management Software
Menus Interface User’s Guide.