Allied Telesis AT-S63 - Manual (Page 41)

41
Chapter 3
Basic Switch Commands
This chapter contains the following commands:
ˆ “DISABLE DHCPBOOTP” on page 43
ˆ “DISABLE IP REMOTEASSIGN” on page 44
ˆ “DISABLE TELNET” on page 45
ˆ “ENABLE BOOTP” on page 46
ˆ “ENABLE DHCP” on page 47
ˆ “ENABLE IP REMOTEASSIGN” on page 48
ˆ “ENABLE TELNET” on page 49
ˆ “PING” on page 50
ˆ “PURGE IP” on page 51
ˆ “RESET SWITCH” on page 52
ˆ “RESET SYSTEM” on page 53
ˆ “RESTART REBOOT” on page 54
ˆ “RESTART SWITCH” on page 55
ˆ “SET ASYN” on page 57
ˆ “SET IP INTERFACE” on page 58
ˆ “SET IP ROUTE” on page 60
ˆ “SET PASSWORD MANAGER” on page 61
ˆ “SET PASSWORD OPERATOR” on page 62
ˆ “SET SWITCH CONSOLETIMER” on page 63
ˆ “SET SYSTEM” on page 64
ˆ “SET TELNET INSERTNULL” on page 65
ˆ “SET USER PASSWORD” on page 66
ˆ “SHOW ASYN” on page 67
ˆ “SHOW CONFIG DYNAMIC” on page 68
ˆ “SHOW CONFIG INFO” on page 71
ˆ “SHOW DHCPBOOTP” on page 72
ˆ “SHOW IP INTERFACE” on page 74
ˆ “SHOW IP ROUTE” on page 75
ˆ “SHOW SWITCH” on page 76