Chapter 32, Mac address-based vlan commands – Allied Telesis AT-S63 User Manual
Page 557
Advertising
557
Chapter 32
MAC Address-based VLAN Commands
This chapter contains the following commands:
“ADD VLAN MACADDRESS” on page 558
“ADD VLAN PORT MACADDRESS” on page 559
“CREATE VLAN TYPE=MACADDRESS” on page 560
“DELETE VLAN MACADDRESS” on page 562
“DELETE VLAN PORT MACADDRESS” on page 563
Note
Remember to use the SAVE CONFIGURATION command to save
your changes on the switch.
Note
MAC address-based VLANs are supported on the AT-9424Ti/SP,
AT-9448T/SP, and AT-9448Ts/XP switches. This feature is not
supported on the AT-9408LC/SP, AT-9424T/GB, and AT-9424T/SP
switches. For background information, refer to Chapter 29, “MAC
Address-based VLANs” in the AT-S63 Management Software
Menus Interface User’s Guide.
Advertising