Allied Telesis AT-S63 - Manual (Page 403)

AT-S63 Management Software Command Line Interface User’s Guide
Section IV: SNMPv3 403
CLEAR SNMPV3 TARGETADDR
Syntax
clear snmpv3 targetaddr= targetaddr taglist
Parameters
targetaddr Specifies the name of the SNMPv3 Target Address
Table entry, up to 32 alphanumeric characters.
taglist Specifies a tag or list of tags, up to 256
alphanumeric characters.
Description
This command clears the value of the taglist parameter in an SNMPv3
Target Address Table entry.
Examples
The following command deletes the value of the taglist parameter from the
SNMPv3 Target Address Table entry called “snmphost79:”
clear snmpv3 targetaddr=snmphost44 taglist
The following command deletes the value of the taglist parameter from the
SNMPv3 Target Address Table entry called “snmphost79:”
clear snmpv3 targetaddr=snmphost79 taglist