Allied Telesis AT-S63 - Manual (Page 428)

Chapter 25: SNMPv3 Commands
428 Section IV: SNMPv3
DESTROY SNMPV3 VIEW
Syntax
destroy snmpv3 view= view [subtree=OID|text]
Parameters
view Specifies the name of the view, up to 32
alphanumeric characters.
subtree Specifies the view subtree view. The options are:
OID A numeric value in hexadecimal format.
text Text name of the view.
Description
This command deletes an SNMPv3 View Table entry. After you delete an
SNMPv3 View Table entry, you cannot recover it.
Examples
The following command deletes the SNMPv3 View Table entry named
“experimental. “ The subtree value of this table entry is experimental.
destroy snmpv3 view=experimental subtree=experimental
The following command deletes the SNMPv3 View Table entry named
“directory.” The subtree value of this table entry is 1.3.6.1.3.
destroy snmpv3 view=directory subtree=1.3.6.1.3