Allied Telesis AT-S63 - Manual (Page 456)

Chapter 25: SNMPv3 Commands
456 Section IV: SNMPv3
SHOW SNMPV3 USER
Syntax
show snmpv3 user= user
Parameters
userSpecifies the name of an SNMPv3 user, up to 32 alphanumeric
characters.
Description
This command displays SNMPv3 User Table entries. You can display one
or all of the table entries.
Examples
The following command displays the SNMPv3 User Table entry for a user
name of Robert:
show snmpv3 user=Robert
The following command displays all of the SNMPv3 User Table entries:
show snmpv3 user