Allied Telesis AT-S63 - Manual (Page 43)

AT-S63 Management Software Command Line Interface User’s Guide
Section I: Basic Operations 43
DISABLE DHCPBOOTP
Syntax
disable dhcpbootp
Parameters
None.
Description
This command deactivates the DHCP and BOOTP client software on the
switch. The default setting for the DHCP and BOOTP client software is
disabled.
To activate the DHCP or BOOTP client software, refer to “ENABLE
BOOTP” on page 46, “ENABLE DHCP” on page 47, “ENABLE IP
REMOTEASSIGN” on page 48, or “SET IP INTERFACE” on page 58.
Example
The following command deactivates the DHCP and BOOTP client
software:
disable dhcpbootp
Equivalent Command
disable ip remoteassign
For information, see “DISABLE IP REMOTEASSIGN” on page 44.