Allied Telesis AT-S63 - Manual (Page 238)

Chapter 15: File Download and Upload Commands
238 Section II: Advanced Operations
UPLOAD METHOD=REMOTESWITCH
Syntax
upload method=remoteswitch
srcfile|file=
filename |appblock|switchcfg
switchlist= switches [verbose=yes|no|on|off|true|false]
Parameters
method Specifies a switch to switch upload.
srcfile or file Specifies the file to be uploaded from the master switch.
Options are:
filename Specifies the name of a configuration file
in the master switch’s file system.
appblock Uploads the master switch’s active
AT-S63 image file.
switchcfg Uploads the master switch’s active boot
configuration file.
switchlist Specifies the switches in an enhanced stack to which to
upload a file or the AT-S63 image file from the master
switch. (To view the switches in an enhanced stack, see
“SHOW REMOTELIST” on page 86.) You can specify
more than one switch at a time (for example, 1,3,4).
verbose Specifies whether to display details of the upload
operation. The options are:
yes, on, true Display the upload details. The options are
equivalent.
no, off, false Do not display the upload details. The
options are equivalent.
Description
This command uploads a boot configuration file or an active AT-S63 file
image from a master switch to other switches in an enhanced stack. This
is refer to as a switch to switch upload.
This command offers a simply means for updating multiple switches in a
stack. For instance, to update switches with a new version of the AT-S63
image file, you can update the master switch first and then use a switch to
switch upload to update the other switches in the stack.