Allied Telesis AT-S63 User Manual
Page 419
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
Section IV: SNMPv3
419
create snmpv3 view=internet1 subtree=internet type=included
storagetype=nonvolatile
The following command creates an SNMPv3 View Table entry called
“tcp1” with a subtree value of the TCP/IP MIBs and a view type of
excluded. The storage type for this table entry is nonvolatile storage.
create snmpv3 view=tcp1 subtree=tcp type=excluded
storagetype=nonvolatile
Advertising