Allied Telesis AT-S63 - Manual (Page 122)

Chapter 7: Port Parameter Commands
122 Section I: Basic Operations
ACTIVATE SWITCH PORT
Syntax
activate switch port= port autonegotiate
Parameter
port Specifies a port. You can specify more than one port at
a time. You can specify the ports individually (for
example, 5,7,22), as a range (for example, 18-23), or
both (for example, 1,5,14-22).
Description
This command prompts a port that is using Auto-Negotiation to
renegotiate its settings with its end node. The command can be helpful if
you believe that a port and an end node have not successfully negotiated
their settings.
Example
This command forces ports 1 and 4 to renegotiate their speed and duplex
mode:
activate switch port=1,4 autonegotiate