Show flash – Allied Telesis AT-S63 User Manual
Page 224
Advertising
Chapter 14: File System Commands
224
Section II: Advanced Operations
SHOW FLASH
Syntax
show flash
Parameter
None
Description
This command displays information about the file system in the switch.
The information includes the number of files stored in the file system, how
much space is used, and the amount of space available. An example of
the information displayed by this command is shown in Figure 27.
Figure 27. SHOW FLASH Command
Example
show flash
Flash:
---------------------------------------------------------
Files ..............
12288 bytes (5 files)
Free .............. 8211456 bytes
Total .............. 8223744 bytes
---------------------------------------------------------
Advertising