Set ip arp timeout – Allied Telesis AT-S63 User Manual
Page 201
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
Section I: Basic Operations
201
SET IP ARP TIMEOUT
Syntax
set ip arp timeout=
integer
Parameter
timeout
The range is 1 to 260000 seconds. The default setting is
400 seconds.
Description
This command prevents the table from becoming full with inactive entries.
It allows you to set the timer for removing temporary entries in the ARP
table. Inactive temporary entries in the ARP table are timed out according
to the ARP cache timeout value which is set with the timeout option.
Example
The following command sets the timer to 600 seconds:
set ip arp timeout=600
Advertising