Allied Telesis AT-S63 - Manual (Page 379)

379
Chapter 23
MLD Snooping Commands
This chapter contains the following commands:
ˆ “DISABLE MLDSNOOPING” on page 380
ˆ “ENABLE MLDSNOOPING” on page 381
ˆ “SET IPV6 MLDSNOOPING” on page 382
ˆ “SHOW MLDSNOOPING” on page 384
ˆ “SHOW IPV6 MLDSNOOPING” on page 386
Note
Remember to use the SAVE CONFIGURATION command to save
your changes on the switch.
Note
For background information on this feature, refer to Chapter 20,
“MLD Snooping” in the AT-S63 Management Software Menus
Interface User’s Guide.