Allied Telesis AT-S63 - Manual (Page 53)

AT-S63 Management Software Command Line Interface User’s Guide
Section I: Basic Operations 53
RESET SYSTEM
Syntax
reset system [name] [contact] [location]
Parameters
name Deletes the switch’s name.
contact Deletes the switch’s contact.
location Deletes the switch’s location.
Description
This command delete’s the switch’s name, the name of the network
administrator responsible for managing the unit, and the location of the
unit. To set these parameters, refer to “SET SYSTEM” on page 64. To
view the current settings, refer to “SHOW SYSTEM” on page 79.
Examples
This command deletes all three parameter settings:
reset system
This command deletes just the name:
reset system name