Allied Telesis AT-S63 - Manual (Page 618)

Chapter 36: Encryption Key Commands
618 Section VIII: Management Security
DESTROY ENCO KEY
Syntax
destroy enco key= key-id
Parameter
key Specifies the ID number of the key pair to be deleted
from the key database.
Description
This command deletes an encryption key pair from the key database. This
command also deletes a key’s corresponding ”.UKF” file from the file
system. After a key pair is deleted, any SSL certificate created using the
public key of the key pair will be invalid and cannot be used to manage the
switch. To view the keys, see “SHOW ENCO” on page 620.
You cannot delete a key pair if it is being used by SSL or SSH. You must
first either disable the SSL or SSH server software on the switch or
reconfigure the software by specifying another key.
Example
The following command destroys the encryption key pair with the key ID 4:
destroy enco key=4