Chapter 10, Static port trunking commands – Allied Telesis AT-S63 User Manual
Page 167
Advertising
167
Chapter 10
Static Port Trunking Commands
This chapter contains the following commands:
“ADD SWITCH TRUNK” on page 168
“CREATE SWITCH TRUNK” on page 170
“DELETE SWITCH TRUNK” on page 172
“DESTROY SWITCH TRUNK” on page 173
“SET SWITCH TRUNK” on page 174
“SHOW SWITCH TRUNK” on page 175
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information and guidelines on static port trunking,
refer to Chapter 8, “Static and LACP Port Trunks” in the AT-S63
Management Software Menus Interface User’s Guide.
Advertising