Enable telnet – Allied Telesis AT-S63 User Manual
Page 49
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
Section I: Basic Operations
49
ENABLE TELNET
Syntax
enable telnet
Parameters
None.
Description
This command activates the Telnet server on the switch. With the server
activated, you can manage the switch using the Telnet application protocol
from any management station on your network. To disable the server,
refer to “DISABLE TELNET” on page 45. The default setting for the Telnet
server is enabled.
Example
The following command activates the Telnet server:
enable telnet
Advertising