Allied Telesis AT-S63 - Manual (Page 311)

AT-S63 Management Software Command Line Interface User’s Guide
Section II: Advanced Operations 311
ADD QOS POLICY
Syntax
add qos policy= value trafficclasslist= values
Parameter
policy Specifies the ID number of the policy you want to
modify. You can modify only one policy at a time.
trafficclasslist Specifies the new traffic classes of the policy. Traffic
classes already assigned to the policy are retained.
Separate multiple traffic classes with commas (e.g.,
4,11,12).
Description
This command adds traffic classes to an existing policy. The traffic classes
must already exist. Any traffic classes already assigned to the policy are
retained by the policy. To add traffic classes while removing those already
assigned, refer to “SET QOS POLICY” on page 338.
Example
This command adds the traffic class 16 to policy 11:
add qos policy=11 trafficclasslist=16